Rte=, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
Invert Rx IRD= 1 byte, 0 or 1
Data
Rx Demod RSW= 2 bytes
Acquisition
Sweep Width
Rx Clock RCK= 1 byte, value
Source of 0 thru 3
Eb/No Alarm EBA= 4 bytes
Point
Rx Buffer RBS= 5 bytes
Size
Description of Arguments
Command or Query.
Invert Receive Data
0=Normal
1=Inverted
Example: IRD = 1 (selects Inverted RX Data)
Command or Query.
Rx ± acquisition sweep range of demodulator, in kHz,
ranging from ± 1 to ± 32 kHz
Example: RSW=09 (selects ± 9 kHz)
Command or Query.
Rx Clock Source, where:
0=Rx Satellite
1=Tx-Terrestrial
2=External Clock Source
3=INSERT (command valid only when Rx framing is
Insert or D&I++ and interface is G.703 or set for
D&I loop.
Example: RCK=1 (selects Tx-Terrestrial)
Command or Query.
Eb/No alarm point in dB, with a range between 0.1 and
16 dB.
Resolution=0.1 dB
Example: EBA=12.3
Command or Query.
Rx Buffer Size, 16 to 32768 bytes, in 2-byte steps, unless
other limitations apply. (See 6.3.1.5)
Example: RBS=08192 (selects 8192 bytes)
16–19
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
IRD= IRD? IRD=x
IRD? (see description of
arguments)
IRD*
IRD#
RSW= RSW? RSW=xx
RSW? (see description of
arguments)
RSW*
RSW#
RCK= RCK? RCK=x
RCK? (see description of
arguments)
RCK*
RCK#
EBA= EBA? EBA=xx.x
EBA? (see description of
arguments)
EBA*
EBA#
RBS= RBS? RBS=xxxxx
RBS? (see description of
arguments)
RBS*
RBS#
Revision 7