Comtech EF Data CDM-600 Installation And Operation Manual page 235

CDM-600 Satellite Modem
ODU Operation
D.2.20 (ODU,ENABLE,1:1,CSAT#1, ALARMS)
(ODU,ENABLE,1:1,CSAT#2, ALARMS)
(ODU,ENABLE,STANDALONE CSAT, ALARMS) STORED-ALARMS
As the stored events are being read, the screen will show:
READING STORED FAULTS.....
Then, the Stored Alarms screen will be shown. An example is shown below:
STORED ALARMS:
IF #84: 10/14/04
Use the [←] or [→] keys to select between the log entries and the CLEAR-ALL option.
With the cursor on the entry number, use the [↑] or [↓] keys to view through the entries.
Up to 99 entries are stored. Each entry shows:
To clear the Stored Alarms Log, select YES in the CLEAR-ALL option and press
ENTER.
D.2.21 (ODU,ENABLE,1:1,CSAT#1)
(ODU,ENABLE,1:1,CSAT#2)
(ODU,ENABLE,STANDALONE CSAT)
INFO:
Use the [←] or [→] keys to select the type of information to view, then press ENTER.
CLEAR-ALL: NO
12:52:08
the entry type: IF = information, FT = fault, OK = fault cleared
the entry number – 00 though 99
the date (international format)
the time
a description of the fault/information
MODEL TX
PLEASE WAIT
(NO,YES)
POWER ON
RX MISC LNA
D–11
Revision 7
MN/CDM600.IOM
STORED-ALARMS
STORED-ALARMS
INFORMATION
INFORMATION
INFORMATION