Dni?N,; Dni=, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
Drop & Insert DNI= 51 bytes
Drop DTS= 3 bytes
Timeslot
Description of Arguments
Command or query.
25 bytes of Drop information:
d = 24 bytes defining Timeslot locations
t = Drop type:
(0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS) as DTY
25 bytes of Insert information:
i = 24 bytes defining Timeslot location
T = Insert type:
(0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS) as ITY
Timeslot definition:
0 = Unused
1-9 for timeslots 1–9, A=10, B=11, C=12, D=13...V=31.
L= Drop and Insert Internal Loop (0 = OFF, 1 = ON)
Example:
123456789ABC0000000000003123456789ABC0000000000
0031
Drop channels 1–12 using timeslots 1–12, and unused
channels 13–24. Same for Insert. E1-CAS, Drop and
Insert directions. Internal Loop ON.
If framing is D&I and data rate is 1920 kbps and DNI Type
is E1-CCS or E1-CAS, then channels cannot be
programmed (i.e. FIXED CHANNEL MODE).The DNI?
Command will display all 'x' in the time-slot positions.
Command or query.
(Note different format between command and query.)
Command format: DTS=xxy
Where xx = Channel 01 through 24
y = timeslot: 0-9, A=10, B=11, C=12, D=13,...V=31
16–36
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
DNI= DNI? DNI=ddddddddddddd
dddddddddddtiiiiiiiiiii
DNI?
iiiiiiiiiiiiiTL
DNI*
(see description of
DNI#
arguments)
Returns current D&I
configuration
Where n = 0 to 9
DNI?n
returns the DNI
portion of 1 of 10
stored
configurations
DTS= DTS? DTS=yyyyyyyyyyyyy
yyyyyyyyyyy
DTS?
DTS*
indicating all 24 Drop
DTS#
timeslots values
associated with the
24 Tx Satellite
channels.
Revision 7