Sno=,; Swr?, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter (Instruction Command or
Code and Response to
Type
Query
Qualifier)
Rx BER N/A 5 bytes
Redundancy N/A 1 byte, 0 or 1
State
Local/Remote LRS= 1 byte, 0 or 1
Status
Software N/A 5 bytes
Revision
Serial SNO= 9 bytes
Number
Description of Arguments
Query only.
Units returns the value of the estimated corrected BER
-3
in the form a.bx10 . First three bytes are the value. Last
two bytes are the exponent. Returns 99999 if the
demodulator is unlocked or BER data is unavailable.
Example: BER=4.8E3 (which is BER=4.8 x 10
Query only.
Unit returns the redundancy state of the unit, where
0=Offline
1=Online
Example: RED=1 (which is Online)
Command or Query.
Used set the user's Local/Remote status, where:
0=Local
1=Remote
Example: LRS=1 (which is Remote)
Query only.
Unit returns the value of the internal software revision
installed in the unit, in the form of x.x.x
Example: SWR=1.0.3
Query only.
Used to set or Query the units 9 digit serial number. Unit
returns its S/N in the form xxxxxxxxx.
Example: SNO=176500143
16–32
Query
Response
(Instruction
to
Code and
Command
Qualifier)
N/A BER?
-3
)
N/A RED?
LRS= LRS?
LRS?
LRS*
LRS#
N/A SWR?
N/A SNO?
Revision 7
MN/CDM600.IOM
Response to Query
BER=x
(see description
of arguments)
RED=x
(see description
of arguments)
LRS=x
SWR=x.x.x
(see description
of arguments)
SNO=xxxxxxxxx
(see description of
arguments)