Table of Contents
Advertisement
■
●
Use the showstatus(8) command to display the unit status. An asterisk (*) is
attached to a unit in abnormal status.
<Example 1>
(MBU) are degraded due to failure.
XSCF> showstatus
*
*
<Example 2> The CPU is degraded due to the effect of the crossbar
unit (XBU) being degraded.
XSCF> showstatus
*
*
<Example 3>
XSCF> showstatus
No failures found in System Initialization.
The meaning of each component status is as follows:
Faulted
Degraded
Deconfigured
Maintenance
Normal
4.6.2
Clearing the Fault/Degradation Information
The information on a faulty or degraded component is cleared when the component
is replaced. For a component replacement, please contact a field engineer.
4-26
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
The memory board and memory on the motherboard unit
MBU_B Status:Normal;
MEMB#1 Status:Deconfigured;
MEM#3B Status:Deconfigured;
MBU_B Status:Normal;
CPUM#1-CHIP#1 Status:Deconfigured;
XBU_B#0 Status:Degraded;
No degraded component is found.
The component is faulty and not operating.
The component is operating. However, either an error has been
detected or the component is faulty. As a result, the component
might be operating with reduced functionality or performance.
As a result of another component's faulted or degraded status, the
component is not operating. (The component itself is not faulted or
degraded.)
The corresponding component is under maintenance. A
deletefru(8), replacefru(8), and addfru(8) operation is
currently underway.
The component is operating normally.
Advertisement
Table of Contents
