Table of Contents
Advertisement
14. Configure the log archiving settings.
• Display log archiving settings and
configure log archiving.
15. Configure the audit settings.
• Display audit settings and configure
auditing.
Note – The auditadm privilege is required for the audit settings.
16. Configure the SNMP settings.
• Display Agent settings and configure
Agent.
• Display and specify the notification
destination server.
17. Make the settings for using the remote maintenance service.
Note – This document does not provide details on the remote maintenance service
functions. For the information of the remote maintenance service, see the Product
Notes for your server.
18. Configure the system board settings.
• Display and set a memory mirror mode.
• Display and specify system boards
separately from the XSB. (Uni-XSB or
Quad-XSB displaying and settings.)
In the M3000 server, the system board cannot be configured. The system board has
been configured by default and you cannot change the settings. However, you can
refer to the system board information.
2-10
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
showarchiving(8), setarchiving(8)
(See
Section 2.2.10, "Log Archiving
Administration" on page
showaudit(8), setaudit(8)
(See
Section 2.2.9, "Audit Administration"
on page
2-120)
showsnmp(8), setsnmp(8),
showsnmpusm(8), setsnmpusm(8),
showsnmpvacm(8), setsnmpvacm(8)
(See
Section 2.2.11, "SNMP Administration"
on page
2-132)
showfru(8), setupfru(8)
(See
Section 2.2.14, "System Board
Configuration" on page
2-127)
2-175)
Advertisement
Table of Contents
