Preface - Fujitsu SPARC EnterpriseM3000 User Manual

Preface

This manual describes the system monitor and control facility, known as eXtended
System Control Facility (XSCF), which is used to control, monitor, operate, and
service SPARC Enterprise M3000/M4000/M5000/M8000/M9000 servers and
domains from Oracle and Fujitsu.
XSCF may also be referred to as the System Control Facility (SCF). Unless otherwise
stated in this manual, the SPARC Enterprise system is described as "the server" or
"the system".
Some references to server names and document names are abbreviated for
readability. For example, if you see a reference to the M9000 server, note that the full
product name is the SPARC Enterprise M9000 server. And if you see a reference to
the XSCF Reference Manual, note that the full document name is the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
Before reading this document, you should read the overview guide for your server
and the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration
Guide.
At publication of this document, servers described herein were shipping with XCP
1110 firmware installed. That might no longer be the latest available version, or the
version now installed. Always see the Product Notes that apply to the firmware on
your server, and those that apply to the latest firmware release.
This chapter includes the following sections:
"Audience" on page xiv
■
"Related Documentation" on page xiv
■
"Text Conventions" on page xvi
■
"Syntax of the Command-Line Interface (CLI)" on page xvii
■
"Documentation Feedback" on page xvii
■
Preface xiii