Fujitsu SPARC EnterpriseM3000 User Manual page 376

Setting System
TABLE 9-10
[Settings]-[Network]-[Current] or [Settings]-[Network]-[Reserve] in the Menu tree.
You can make the network configuration from both [Current] and [Reserve] menus.
The [Current] menu displays the XSCF network information which is running on the
server, and the [Reserve] menu can be used to confirm the data you configured.
Click the [Apply] and [Reboot] buttons on the [Reserve] menu to apply the setting
values of network configuration.
Network Configuration (1 of 2)
TABLE 9-10
Menu Function
Current XSCF network information and status
display, and XSCF network configuration
Route display and configuration
DNS display and configuration
9-16 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
lists the functions for the network configuration of XSCF. Select
Remarks
Displays the XSCF network information and status
which is running on the server.
This function is equivalent to the shownetwork(8)
and showhostname(8) commands.
Also, this function sets each host name, domain
name, IP address, netmask, and enabling/disabling
of the XSCF network interface.
This function is equivalent to the setnetwork(8)
and sethostname(8) commands.
You can confirm the settings from the [Reserve]
menu.
Displays the current routing, and configures the
routing.
This function is equivalent to the showroute(8)
and setroute(8) commands.
You can confirm the settings from the [Reserve]
menu.
Displays the current name server and search path,
and configures the name server and the search
path.
This function is equivalent to the
shownameserver(8) and setnameserver(8)
commands.
You can confirm the settings from the [Reserve]
menu.