Fujitsu SPARC EnterpriseM3000 User Manual page 187

TABLE 2-22
Mail Administration
TABLE 2-22
Item Description
Display SMTP Displays SMTP server setting
server settings information.
SMTP server Sets the host name or IP address of the
SMTP server.
Authentication If you enable the Authentication, at the
server same time, select the POP authentication
or the SMTP authentication. When you
enable the authentication, specify the
host name or IP address of the
authentication server, user ID, and
password.
Port number Sets the port number of the SMTP server. setsmtp
Reply address Sets the mail address to be specified in
the From: header of a mail message.
Display mail Displays mail report function setting
settings information.
Enable/ Enables or disables the mail report
Disable function.
Recipient Sets the recipient address for a mail
address message to be sent to the system
administrator.
2-144 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
lists the settings and the corresponding shell commands.
Shell
Command Remarks
showsmtp
No default value has been
setsmtp
set.
Only one SMTP server can
be specified.
If you specify a host name
for an SMTP server, the
server name must be
resolvable by DNS server.
Default is disable
setsmtp
authentication.
The default port number of
the SMTP server is 25.
To send an error mail when
setsmtp
there is a problem in the
path to the recipient
address from the mail
server, the mail address is
specified.
showemailreport
The default setting is
setemailreport
"Disable."
• Multiple addresses can
setemailreport
• Include one @ mark per
be specified to up to 255
characters, by using a
comma as the delimiter.
address. (Ex.
name1@domain1,
name2@domain2,
name3@domain3, ...)