Fujitsu SPARC EnterpriseM3000 User Manual page 205

Note – For the procedure for installing, removing, or replacing a system board in
the server, see the Service Manual for your server. Also, for details on using the DR
function, see the Dynamic Reconfiguration User's Guide.
Note – For an overview of configuring domains, including an extensive example,
refer to the Administration Guide.
TABLE 2-28
Domain Configuration
TABLE 2-28
Item Description
Display XSB Displays the XSB status for the specified
status domain or all domains.
For XSB status information, see
Display Displays one of the following items for the
domain status current domain status:
For details of domain status, see
Display Displays the use status of devices and
resource use resources on an XSB.
state
Display DCL Displays the DCL information for a system
information board in the specified domain.
DCL Sets DCL information.
Specify configuration for LSB of specified
domain.
For details of configuration information, see
TABLE 2-26
Add to domain Adds or assigns an XSB to a domain,
according to DCL information.
Specify the following:
• Domain ID and number of the added XSB
• assign
Specify one of the following integration
states when the domain is running (the DR
function):
• configure (configure into Oracle Solaris
OS)
• assign
• reserve (assign (reserve))
2-162 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
lists setting items and the corresponding shell commands.
TABLE 2-27
TABLE 2-26
.
Shell command
showboards
.
showdomainstatus
showdcl
.
showdevices
showdcl
setdcl
addboard
Remarks
"Omit-memory",
"Omit-I/O", and
"Floating board" are
false by default.
If the XSB is placed in
the assign state, a
reboot of the assigned
domain or the
addboard(8) command
with "configure"
specified would
configure the board into
a running Oracle Solaris
OS domain (the DR
function).