Table of Contents
Advertisement
The administrator group has platadm, useradm, and auditadm privileges and you
cannot change that. Also the operator group has platop and auditop privileges and
you cannot change that.
Setting timeout
Command operation
■
1. Use the showad(8) command to display timeout period.
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
logdetail: none
2. Use the setad(8) command to set the transaction timeout.
<Example> The timeout priod is set to 10 sec.
XSCF> setad timeout 10
3. Use the showad(8) command to confirm the timeout.
XSCF> showad defaultrole
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: none
Chapter 2
Setting Up XSCF
2-67
Advertisement
Table of Contents
