Fujitsu SPARC EnterpriseM3000 User Manual page 195

DCL Information (Continued)
TABLE 2-26
DCL Item
Floating Board
Configuration policy
Domain status
One domain can use up to 16 LSBs. The user can define the different XSB in each
LSB by using XSCF. Also, multiple domains can assign LSBs to the same XSB. If
multiple domains assign them to the same XSB, however, the domains not using that
XSB are in a state (Unconfigured) that does not allow them to use the XSB until the
domain using it (Assigned or Configured) releases it.
Caution – IMPORTANT - If the XSB associated with the specified LSB has been
configured in the domain configuration, the information that is set for the LSB
cannot be changed. Also, if the specified domain is running, the value of
configuration policy cannot be changed. To change the value, first turn off power to
the domain.
TABLE 2-27
showboards(8) command.
2-152 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Setting Details and Notes
True : Selects a Floating Board.
False : Does not select a Floating Board (default).
FRU : Removal in units of Field Replaceable Unit (FRU) components. (Default)
XSB : Removal in XSB units
System : Hardware is degraded in units of domains or the relevant domain is stopped
without degradation.
In the M3000 server, you can set the configuration policy only.
Display domain status as follows.
Powered Off: Power off state.
Initialization Phase: State that POST is proceeding or initializing is started by
OpenBoot PROM.
OpenBoot Executing Completed: State that initializing is completed by OpenBoot
PROM
Booting/OpenBoot PROM prompt: The Oracle Solaris OS is booting. Or due to the
domain shutdown or reset, the system is in the OpenBoot PROM running state, or is
suspended in the OpenBoot PROM (ok prompt) state.
Running: State that Oracle Solaris OS is running.
Shutdown Started: State that the power off is started.
Panic State: State that panic is occurred and reset is not started.
lists the XSB status information. This information can be displayed by the