Table of Contents
Advertisement
2. Use the setdomainmode(8) command to specify host watchdog and break
signal suppression.
<Example> Enable Host watchdog and Break signal suppression for domain ID 0.
XSCF> setdomainmode -d 0 -m secure=on
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
3. Use the showdomainmode(8) command to confirm the secure mode is on. Also,
to apply the setting to the domain, restart the domain.
Enabling or Disabling the Automatic Boot Function
Command operation
■
1. Use the showdomainmode(8) command to specify automatic boot.
XSCF> showdomainmode -d 0
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
:max
-> -
:off
-> on
:on
-> -
:auto
-> -
:max
:on (host watchdog: available
:on (autoboot:on)
:auto
:0f010f10
:max
:on
:on
:auto
Break-signal:non-receive)
Chapter 2
Setting Up XSCF 2-187
Advertisement
Table of Contents
