Table of Contents
Advertisement
TABLE 9-16
[Settings]-[User Manager] in the Menu tree.
User Management Configuration
TABLE 9-16
Function
User accounts list display
User accounts addition and deletion
Enabling/disabling user accounts
User accounts information display and change
Your own account information display and
password change
Password policy display and setting
Privileges for remote user account settings
Note – The login lockout function is not supported by XSCF Web. Set the function
by using setloginlockout(8) and showloginlockout(8) commands.
lists the functions for configuring XSCF user management. Select
Remarks
Displays user accounts information and the state
being registered now. The useradm privilege is
required.
This function is equivalent to the showuser(8)
command.
Adds and deletes a user account. The useradm
privilege is required.
These functions are equivalent to the adduser(8)
and deleteuser(8) commands.
Enable and disable a user account. The useradm
privilege is required.
These functions are equivalent to the
enableuser(8) and disableuser(8) commands.
Displays a user account information and changes
the password, privilege, password policy. The
useradm privilege is required.
These function are equivalent to the password(8),
setprivileges(8), and setpasswordpolicy(8)
commands.
Displays information of your own account without
the useradm privilege and changes the password.
These functions are equivalent to the showuser(8)
and password(8) commands.
Display the current system password policy. And
set the password policy that will be applied now.
These function are equivalent to the
showpasswordpolicy(8) and
setpasswordpolicy(8) commands.
Change the privilege for a user account that is
defined in an LDAP repository.
This function is equivalent to the
setprivileges(8) command.
Chapter 9
How to Use the XSCF Web
9-23
Advertisement
Table of Contents
