Table of Contents
Advertisement
XSCF Commands (Continued)
TABLE 5-1
Command
showenvironment
showstatus
showhardconf
poweron
poweroff
reset
setpowerupdelay
showpowerupdelay
setshutdowndelay
showshutdowndelay
setdualpowerfeed
showdualpowerfeed
setlocator
showlocator
switchscf
ioxadm
clockboard
setdomparam
getflashimage
flashupdate
version
prtfru
dumpconfig
restoreconfig
5-6
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Description
Displays the temperature, humidity, voltage, fan rotation speed, power
consumption, and exhaust airflow.
Lists degraded components.
Displays all components mounted in the server.
Turns on power to all domains or the specified domain.
Turns off power to all domains or the specified domain.
Resets the specified domain.
Note: The following three reset modes are available:
por: Domain system reset
request: Domain panic instruction
xir: Domain CPU reset
Sets the warm-up time and the air-conditioning wait time.
Displays the warm-up time and the air-conditioning wait time settings.
Sets the UPS shutdown delay time at power failure.
Displays the UPS shutdown delay time at power failure.
Sets the dual power feed.
Displays the dual power feed.
Enables or disables the CHECK LED blinking.
Displays the LED status.
Switches the XSCF Unit state (Active/Standby).
Configures the External I/O Expansion Unit (IOBOX).
Displays the External I/O Expansion Unit settings.
Sets/Displays the number of clock unit (CLKU) used when the next platform is
powered on.
Rewrites the OpenBoot PROM environment variable that is compulsory.
Gets the firmware update program.
Updates the firmware program.
Displays the comprehensive firmware (XCP) version.
Displays the XSCF firmware version.
Displays the OpenBoot PROM firmware version.
Displays the FRU-ROM data.
Saves XSCF configuration information to the specified destination.
Restores XSCF configuration information from the specified destination.
Advertisement
Table of Contents
