Table of Contents
Advertisement
Do Not Know the IP Address of XSCF
Use the shownetwork(8) command to check the current network configuration. If
■
it has not yet been set, ask the network administrator to check the setting.
If necessary, use the console on the personal computer that is directly connected
■
to XSCF through the serial port to log in to the XSCF Shell, and check the XSCF-
LAN settings using the shownetwork(8) command.
The Console of the XSCF Shell or the Domain Console was Suddenly
Disconnected
Someone may perform the applynetwork(8) and rebootxscf(8) commands
■
after the setnetwork(8), setroute(8), sethostname(8), and
setnameserver(8) commands were executed, or the flashupdate(8)
command may have been executed. To use the XSCF, establish another connection
and log in to the system again.
Someone may have used the setdate(8) command or the switchscf(8)
■
command. To use the XSCF, establish another connection and log in to the system
again.
If the XSCF Shell is not used during the specified length of time after login, it
■
automatically terminates itself. This forced termination occurs when the specified
period has elapsed, only if the time monitoring function is enabled and a length
of time is specified for this function in the XSCF settings.
When the escape character (Example: "#") set by client and "." (period) keys are
■
entered, the Oracle Solaris Secure Shell or SSH client of OpenSSH is disconnected.
If the setting of escape character is the same in the Oracle Solaris Secure
Shell/SSH client and console(8) command, the terminal is disconnected. So,
please change the value of either setting. For more information, see the manual
for SSH Client.
Could Not Power On or Off the Server
In operation with a user privilege other than the platadm or fieldeng privilege,
■
the power on and power off operations for the entire system are not available. For
information about user privileges, see the Administration Guide or XSCF Reference
Manual.
Could Not Add an XSCF User
Check the number of XSCF registration users. For information about the number
■
of registration users, see
administrator.
Chapter 2
and
Chapter
3. Otherwise, contact the system
Appendix D
Troubleshooting
D-3
Advertisement
Table of Contents
