Table of Contents
Advertisement
Configuring IP Packet Filtering Rules for XSCF Network
Command operation
■
1. Use the showpacketfilters(8) command to display the IP packet filtering
rules for XSCF-LANs.
<Example 1> Display the IP packet filtering rules settings for XSCF
network.
XSCF> showpacketfilters -a
-i xscf#0-lan#0 -j ACCEPT
-i xscf#0-lan#1 -j ACCEPT
-s 173.16.0.0/255.255.0.0 -j ACCEPT
-s 205.168.148.100/255.255.255.255 -j ACCEPT
<Example 2> Display status of current IP packet filtering rules.
XSCF> showpacketfilters -l
pkts bytes target
124
<Example 3> Display that IP packet filtering rule is not set.
XSCF> showpacketfilters -a
XSCF>
2. Use the setpacketfilters(8) command to set the IP packet filtering rules.
name server and the search path. The IP packet filtering rules are applied in the
order in which they are defined.
2-32
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
102K ACCEPT
0
0 ACCEPT
0
0 ACCEPT
0
0 ACCEPT
prot in
all
xscf#0-lan#0 0.0.0.0/0.0.0.0
all
xscf#0-lan#1 0.0.0.0/0.0.0.0
all
*
all
*
source
173.16.0.0/255.255.0.0
205.168.148.100
Advertisement
Table of Contents
