Fujitsu SPARC EnterpriseM3000 User Manual page 99

3. Use the showad(8) command to confirm the DNS locator mode status.
XSCF> showad
dnslocatormode: enabled
expsearchmode: disabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none
Configuring the DNS locator Query
■
1. Use the showad(8) command to display the configuration of the DNS locator
query.
XSCF> showad dnslocatorquery -i 1
service 1: (none)
XSCF> showad dnslocatorquery -i 2
service 2: (none)
2. Use the setad(8) command to configure the DNS locator query.
XSCF> setad dnslocatorquery -i 1 '_ldap._tcp.gc._msdcs..'
3. Use the showad(8) command to confirm the DNS locator query.
XSCF> showad dnslocatorquery -i 1
service 1: _ldap._tcp.gc._msdcs..
DNS and DNS locator mode must be enabled for DNS locator queries to work.
2-56 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation