Table of Contents
Advertisement
XSCF Commands (Continued)
TABLE 5-1
Command
showldapssl
sethttps
showhttps
setupplatform
setarchiving
showarchiving
setaudit
showaudit
viewaudit
setsnmp
showsnmp
setsnmpusm
showsnmpusm
setsnmpvacm
showsnmpvacm
setsunmc
showsunmc
setdcl
showdcl
showboards
showdevices
showdomainstatus
5-4
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Description
Displays LDAP/SSL client settings.
Configures the https settings.
Displays the https settings.
• Sets up platform-specific settings.
Note: In the platform-specific settings, the following items can be optionally
configured. Each item is the same as the setting of
• User Account settings
• XSCF Network Settings
• Internal DSCP Network
• Domain Name Service
• Network Time Protocol
• SSH
• HTTPS Server
• Email Reports
Configures the log archiving function of XSCF.
Displays the settings of the log archiving function of XSCF.
Configures the auditing of XSCF.
Displays the settings of the audit of XSCF.
Displays the audit records (Audit trail) of XSCF.
Configures the SNMP Agent.
Displays the SNMP Agent settings.
Configures the USM management information for the SNMP agent.
Displays the USM management information for the SNMP agent.
Configures the VACM management information for the SNMP agent.
Displays the VACM management information for the SNMP agent.
Start or stop the Sun Management Center agent and make changes to its
configuration.
Show setup information and status of Sun Management Center agent.
Specifies the domain configuration information (DCL).
Displays the domain configuration information.
Displays the component information and the COD information about a system
board.
Displays the domain information specified for a system board.
Displays the domain status.
Chapter
2.
Advertisement
Table of Contents
