Table of Contents
Advertisement
2. Use the setad(8) command to enable or disable the strictcertmode.
<Example1> Enable the strictcertmode.
XSCF> setad strictcertmode enable
<Example2> Disable the strictcertmode.
XSCF> setad strictcertmode disable
3. Use the showad(8) command to confirm the strictcertmode status.
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
logdetail: none
If strictcertmode is enabled, the server's certificate must have already been uploaded
to the XSCF.
2-58
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Advertisement
Table of Contents
