Types Of Xscf Connections - Fujitsu SPARC EnterpriseM3000 User Manual

Table of Contents

1. Perform the console(8) command on the XSCF Shell terminal screen to select

the domain console.

XSCF> console -d 0

Note – One RW console can be connected in one domain. If a user with platadm or

domainadm user privilege forcibly connects a RW console, the currently connected

RW console is disconnected.

2. To switch from the domain console to the XSCF Shell, press the "#" (default

escape character) and "." (period) keys while holding down the Enter key.

3. Confirm that the XSCF Shell prompt (XSCF>) is displayed in the terminal.

4. To set a escape character different from the default value, perform the

console(8) command with specifying the option. It is enabled only at the

current session.

<Example> Change the escape character to |.

XSCF> console -d 0 -s "|"

Console contents may be logged.

Connect to DomainID 0?[y|n] :y

Note – For details on types of the escape character, see the man page or the XSCF

Reference Manual.

Types of XSCF Connections

This section provides some examples of XSCF connection.

Connecting to the XSCF and the Server