Table of Contents
Advertisement
Altitude Administration (required)
■
DVD Drive/Tape Drive Unit Administration (optional)
■
COD Administration (optional) (see the following Note 4)
■
Note – (1) This document does not provide details on the remote maintenance
service functions. For the information of the remote maintenance service, see the
Product Notes for your server.
Note – (2) Domain configuration is not required in the M3000 server. Some of the
options can be configured. For details, see
on page
Note – (3) In the M3000 server, system board cannot be configured. System board
has been configured by default and you cannot change the setting. However, you
can refer to the system board information.
Note – (4) In the M3000 server, COD is not available.
After the XSCF is set up, the settings are automatically saved in XSCF internally and
in the operator panel. Once you have configured the XSCF, it requires no day-to-day
management. However, you can save or restore the XSCF setup configuration
information. For details of saving or restoring XSCF configuration information, see
Section 2.3, "Save and Restore XSCF Configuration Information" on page
About Setup Flow
The XSCF Shell or XSCF Web can be used to set up XSCF.
Each setting items and the step summary are explained in
Summary by the XSCF Shell" on page 2-3
the XSCF Web" on page
"Specifying the XSCF Settings" on page
2-2
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
2-146.
2-12. Details on each step are provided in
Section 2.2.13, "Domain Configuration"
Section 2.1.1, "Setup
and
Section 2.1.2, "Setup Summary Using
2-15.
2-195.
Section 2.2,
Advertisement
Table of Contents
