Table of Contents
Advertisement
2. From an SSH client, specify the IP address or host name of XSCF and the port
number, if necessary (default port number 22), and use SSH connection via
XSCF-LAN.
3. Enter a user account and password when prompted by XSCF.
4. The fingerprint of the host public key may be displayed with a request to
confirm its authenticity. If it is authentic, enter "yes" as the response, since the
XSCF is correct with confirming the fingerprint.
5. Enter XSCF commands at the shell prompt (XSCF>) that is displayed after log
in to XSCF.
Note – To set the password for an XSCF user account, use the password(8)
command. The shownetwork(8) command can be used to display XSCF-LAN
setting information and the current network connection status.
Chapter 5
Overview of the XSCF Shell
5-9
Advertisement
Table of Contents
