Network Setup; Network Setup > Ip Settings - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface

Network Setup

Network Setup > IP Settings
Use this window to set up your network.
IP Settings – LAN
The MultiModem iSMS needs to be programmed with a static IP address. The MultiModem iSMS does not support DHCP
assigned IP addresses.
IP Address
Enter the IP Address of the LAN Interface. The factory default is 192.168.2.1.
Subnet Mask
Enter the Subnet Mask for the IP address configured. The factory default is 255.255.255.0.
Default Gateway
Enter the Default Gateway. The factory default is 192.168.2.2.
Primary DNS and Secondary DNS
Enter the address of the primary and secondary DNS (domain name system) IP Address. The order in which domain names
are entered is the order in which they are consulted.
Note:
Valid Gateway and DNS Addresses: For e-mail notifications and SNTP Time/Date accuracy, you must have a live
Ethernet connection, and this requires a valid gateway address and at least one DNS address.
Save
Click Save.
MultiModem® iSMS System Administrator's Guide 38