Sms Services > Sms Settings - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface
SMS Services > SMS Settings
Use this window to set general system settings related to SMS encoding format, time & date format and network
registration.
Extended Enabling this mode allows the MultiModem iSMS to pass characters in the text message that are made
ASCII 8-bit up of 8 bits instead of 7 bits (1 byte characters 0x80 through 0xFF). When enabled, the Extended ASCII
(ISO-8859-1) characters option becomes available on the following windows:
•
Send SMS window
•
Triggers window
•
Preconfigured SMS window.
Set as Factory To set Extended ASCII 8-bit as the factory default, select this check box and click Save.
Default
Use this option when you want to "Reset to Factory Defaults".
This option is ignored and overwritten when invoking the "Reset MultiModem iSMS Defaults" option.
Save Click Save to set each changed setting before navigating away from this page.
Unicode Enabling this mode allows the MultiModem iSMS to pass characters encoded using UTF16 (2 byte
characters 0x0001 through 0xFFFF). Select this check box and click Save to allow Unicode text in the SMS
messages
Set as Factory Select this check box and click Save to set Unicode as the factory default. This option is used when
Default performing a "Reset to Factory Defaults". This option is ignored and overwritten when invoking the
"Reset MultiModem iSMS Defaults" option.
Save Click Save to set each changed setting before navigating away from this page.
Date Select a format for the date:
MultiModem® iSMS System Administrator's Guide 46