Save & Restart - Multitech MultiModem iSMS SF100-G Administrator's Manual

TCP Connection
The TCP Connection feature is a per modem port feature that provides direct AT command access to the modem's serial
interface for troubleshooting purposes only. When you open a TCP socket on the defined TCP port number (for example,
5000), the modem is no longer available to the unit's send and receive queues. Events that occur while the socket is open
to the modem do not get logged by the system (that is, SMS messages received by the modem are not logged in the
system nor delivered through the Receive API process). It is recommended that you disable this feature after you have
setup and tested the system.
TCP Connection
Enable or Disable the TCP Connection by clicking the appropriate radio button. Default: Enable
TCP Connection Port
The TCP port number on which the MultiModem iSMS is listening. Ensure each cellular modem port in the MultiModem
iSMS is listening on a different TCP port number.
Default is 5000 for an SF100; 5000 thru 5003 for ports 1 through 4 for an SF400 and 5000 through 5007 for ports 1 thru 8
of an SF800.
Save
Click Save.
Save & Restart
IMPORTANT Note About Saving System Settings
When you have completed entering your MultiModem iSMS settings and you are not going to enter any more
configuration data, you must go to the Save & Restart menu and perform a Save to Flash. Saving to the Flash
Memory saves the new settings in the flash prom and prevents the settings from getting lost at the next power
up.
Save
Click Save to save your system settings to the flash memory.
Restart is Optional
This is optional. You do not have to restart the MultiModem iSMS after saving to the flash memory.
41
Chapter 4 – Using the MultiModem iSMS Web Interface
MultiModem® iSMS System Administrator's Guide