Triggers; Triggers > Authentic List; Triggers > Broadcast Triggers - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface

Triggers

Use the four Triggers windows to:
●
Establish a list of users who are authorized to trigger a broadcast.
●
Set up broadcast triggers.
●
Set up action triggers.
●
Compose and save pre-configured messages.
Triggers > Authentic List
Use this window to set up a list of users who are authorized to trigger a broadcast. This list is made up of entries found in
the Address Book. This list is used by the Broadcast Trigger setup menu when the Broadcast Trigger option "Authenticate"
is enabled.
Authentic List
Click Add to display the Address Book from which you can select users who are added to the Authentic List.
Note:
Without a populated Address Book, no users can be added to the Authentic List.
Triggers > Broadcast Triggers
Use this window to set up Broadcast Triggers. A Broadcast Trigger is a function of the MultiModem iSMS server. When a
Trigger message (code or word) is received from a cellular phone or mobile end point, the MultiModem iSMS server
responds by sending a predefined Broadcast message (SMS) to a predefined group of recipients (Address Book entries and
Group). The Broadcast Message is also sent to the sender of the trigger, indicating the trigger was received and the
broadcast invoked.
Broadcast Triggers
Click Add to display the Add a Broadcast Trigger window.
MultiModem® iSMS System Administrator's Guide 56