Triggers > Action Triggers - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface
Triggers > Action Triggers
Action Triggers are the codes or words sent from a remote cell phone and received by the MultiModem iSMS – the trigger
executes the action associated with it. This is a setup window; no messages are sent from this window.
The trigger codes or words along with the authentication function may be configured for each trigger action. If
authentication is enabled, only the trigger code or word received from an authenticated user can trigger the action.
Trigger Action – The action is executed when a properly formatted Trigger Message is received.
Trigger Message (Codes or Words) – The window shows the default Trigger Message for each Trigger Action. The code or
word (Trigger Message) used to invoke the specific action can be changed by clicking on the Edit option for each Trigger
Action. See the table on the next page for an explanation of how the trigger codes and their associated actions are used.
Authenticate – If the authenticate option is enabled, only the message received from the configured authenticated user
can trigger the action. The authenticated users are set up on the Triggers > Authentic List window.
Enable Authentication
To enable authentication click Edit. The Authenticate column then displays a check box, and the View/Edit column
displays the words Save and Cancel.
Click the check box to enable Authentication for this action and then click Save. If you want to disable Authentication for
this action, simply click Cancel.
MultiModem® iSMS System Administrator's Guide 58