Chapter 6 - Sms Examples; Verifying The Sim Card Is Installed And Activated - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 6 – SMS Examples

Verifying the SIM Card is Installed and Activated

To verify that the SIM is installed correctly and that it is activated.
Power up the MultiModem iSMS. Wait until the Status LED and the LS LED are blinking before continuing. Make sure
1.
all setup procedures and connections have been made. See Chapter 2.
Open the Web browser, enter the IP address, and login to the MultiModem iSMS. See Chapter 3.
2.
Go to the Network Setup > Cellular Modem window.
3.
a. Enter the phone number of your SIM card. Example: 6126361654.
Click Save.
4.
Click Save & Restart under the Menu Bar. Select Save.
5.
Send a text message to yourself. Do this on the SMS Services > Send SMS window.
6.
To – Enter Phone Numbers – Enter the SIM phone and click Add. The phone number displays in the box to the
7.
right.
SMS Text – Enter an SMS Text message. The format add;SF100 is a trigger message word that tells the
8.
MultiModem iSMS to add the phone number and name to the address book. Notice the use of the semicolon in
this message.
Click Send. The following message displays: Your request is being processed.
9.
Click OK.
10.
72
Note: You do not have to restart the MultiModem iSMS.
MultiModem® iSMS System Administrator's Guide