Multitech MultiModem iSMS SF100-G Administrator's Manual page 91

Error Codes
Error Code Error Description
601 Authentication failed
602 Parse error
603 Invalid category
604 SMS message size is greater than 160 chars
605 Recipient overflow
606 Invalid recipient
607 No recipient
608 MultiModem iSMS is busy, can't accept this request
609 Timeout waiting for a TCP API request
610 Unknown action trigger
611 Error in broadcast trigger
612 System error – memory allocation failure
Invalid modem index
613 In SF400, if modem index given is not within 0 to 4
In SF800, if modem index given is not within 0 to 8
Invalid device model number
614
(model number is not detected properly to validate the
modem index)
615 Invalid encoding type
616 Invalid time/date input
617 Invalid count input
618 Service not available (non-polling receive API is enabled so
polling receive API service is not available)
619 Invalid addressee
620 Invalid priority value
621 Invalid SMS text
This error code is given if the following is not true:
If enc = 2, SMS text must be in hexadecimal form. Each
hexadecimal value length is a maximum of 4 digits and
semi-colon is used as a delimiter between two
hexadecimal values.
If enc = 3, SMS text must be in decimal form. Each decimal
value length is maximum 5 digits and semi-colon is used as
delimiter between two decimal values.
Note: Decimal values allowed up to 65535 only.
91
Appendix A – Application Programming Interface (API)
Response to
Send API, Query API
Send API, Query API
Send API
Send API
Send API
Query API
Send API
Send API, Query API
Send API
Send API
Send API
Send API, Query API
Send API
Send API
Send API
Receive API
Receive API
Receive API
Receive API
Send API
Send API
MultiModem® iSMS System Administrator's Guide