Network Setup; Network Setup > Ip Settings - Multitech SF100-G User Manual For System Administrators

Network Setup

Network Setup > IP Settings
Use this screen to set up your network.
IP Settings – LAN
IP Address
Enter the IP Address of the LAN Interface. The factory default is 192.168.2.1.
Subnet Mask
Enter the Subnet Mask for the IP address configured. The factory default is 255.255.255.0.
Default Gateway
Enter the Default Gateway. The factory default is 192.168.2.2.
Primary DNS and Secondary DNS
Enter the address of the primary and secondary DNS (domain name system) IP Address. The order in
which domain names are entered is the order in which they are consulted.
IMPORTANT Note About Valid Gateway and DNS Addresses
For e-mail notifications and SNTP Time/Date accuracy, you must have a live Ethernet connection,
and this requires a valid gateway address and at least one DNS address.
Save
Click the Save button.
TCP Connection
TCP Connection
Enable or Disable the TCP Connection by clicking the appropriate radio button. Default: Enable
TCP Connection Port
Enter the Port number on which the TCP port will connect.
Save
Click the Save button.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
Network Setup > IP Settings
30