Multitech MultiModem iSMS SF100-G Administrator's Manual page 49

Chapter 4 – Using the MultiModem iSMS Web Interface
Modem
Select a specific modem from which to send the message, or use the default of Any.
Priority
Set the priority level for the message to be sent. When messages enter the queue to be sent, the priority levels are
compared and the messages flagged as High are sent first, followed by Normal and Low.
Options: Low, Normal (default), High.
Send button
When you are ready, click Send to send your message – click OK when the pop-up "in process" message appears. The
message is not sent unless you acknowledge this pop-up.
49 MultiModem® iSMS System Administrator's Guide