Sms Services > Sms Api - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface
SMS Services > SMS API
This feature helps you use the MultiModem iSMS Application Programming Interface (API).
HTTP API and TCP API are Send SMS APIs (for sending SMS messages to mobile endpoints on the cellular network). Both
methods can be enabled and used simultaneously.
SMS Messages received from the cellular network are handled by the Receive API process.
Note: See Appendix A for specific information on API command structure, options, responses and XML data structure.
HTTP API Configuration
IP enabled applications external to the MultiModem iSMS can submit messages for sending by using HTTP protocol Get
and POST commands.
HTTP API Status
Check the box to enable the HTTP API service.
HTTP Port
Enter the port number on which the HTTP API service listens. It is recommended this port be different from what the WEB
Management Interface uses. The default is 81.
Save
Click Save.
TCP API Configuration
IP enabled applications external to the MultiModem iSMS can submit messages for sending by using this product specific
command protocol. See Appendix A for more details.
TCP API Status
Check the box to enable TCP API service. This is necessary for units participating in load balancing.
TCP Port
Enter the port number on which the TCP API service listens. The default is 2040.
Save
Click Save.
MultiModem® iSMS System Administrator's Guide 50