Network Setup > Cellular Modem - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem iSMS Web Interface
Network Setup > Cellular Modem
Use this window to configure the cellular modems. Click the Modem# tab at the top to work with that specific modem.
You configure each modem individually.
Status
Modem Status (SF400 and SF800 models only)
This box is checked by default. This means that this modem is considered for use. If you do not have or want a SIM card
for a particular modem, uncheck the box so that the modem is not used. Repeat this process for any modems that do not
have SIM cards. A graphic to show which internal modem is assigned to each number is in the SIM card installation
section of Chapter 2.
Save
After configuring a modem, click Save before you select the next modem to configure from the modem tabs.
Modem Initialization Strings
Initialization Strings 1 – 3
Initialization strings are composed of AT commands sent to the modem to initialize and prepare it for connection. The
contents of these 3 fields are sent in addition to and after the built in initialization commands are issued by the iSMS
server. The modems are initialized upon power up, modem status enable, modem port reset and upon termination of TCP
connections. See the GPRS AT Commands Reference Guide for additional information.
Save
After configuring a modem, click Save before you select the next modem to configure from the modem tabs.
39 MultiModem® iSMS System Administrator's Guide