Sms Services > Outbox - Multitech MultiModem iSMS SF100-G Administrator's Manual

SMS Services > Outbox
The Outbox is for the unit as a whole. This window chronologically lists sent messages and includes Message ID, Sending
unit, who submitted the message, receiver's number, the message sent, and the timestamp.
To determine the specific modem port on which the SMS was transmitted, note the exact time and date of the message
and then review the Sent SMS Log found in the Trace Logs menu.
SF100 Note: SF100 models require you to perform a "Save to Flash" for the Inbox and Outbox records to be retained upon
system restart. SF400 and SF800 models do not have this requirement.
Clear Outbox
Click Clear to delete all the outbox entries.
Msg ID
The message ID (Msg ID) is non-zero if the message has been sent using SEND API. A Msg ID of zero means it was
submitted using the Web Management Send SMS menu.
Handled By
Displays the MultiModem iSMS unit used to send the SMS. If Outbox of the unit you are viewing is the unit that sent the
SMS to the cellular network, it displays "Local" (regardless of Load Balancing configuration). If this Outbox is that of the
Load Balancing Master and the message was distributed to a Slave unit, it displays "Slave#" (where # is 1 thru 4).
User
Displays the user name of the account that sent the message.
To
Shows the numbers or groups to which the message is sent.
SMS
Display the text sent in the message.
Date
Shows the day the message was sent.
Time
Displays the time the message was sent.
Note: For messages in the Outbox to have a valid date/time stamp, be sure to set up one of the following options:
●
SNTP Client must be enabled and the Ethernet connection must be live to the Internet.
-or-
●
Enter the iSMS cellular phone number on the Network Setup > Cellular Modem window.
55
Chapter 4 – Using the MultiModem iSMS Web Interface
MultiModem® iSMS System Administrator's Guide