Multitech MultiModem iSMS SF100-G Administrator's Manual page 33

Time Zone Configuration
Time Zone Enter your time zone. Default is UTC (Universal Coordination).
The greenwichmeantime.com website has Time Zone information in detail or you can find a portion of
the Time Zone abbreviations in Appendix E of this manual.
Time Zone Enter +/- hh:mm. Default is +06:00. Offset is the amount of time varying from the standard time of a
Offset Time Zone.
Daylight Configuration
Daylight Enables/disables Daylight Saving mode. Default is Enable.
Saving
Daylight Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + / - minutes.
Saving Offset Offset is the amount of time varying from the standard time of a Time Zone.
Daylight Saving Start Time
Start Ordinal Set the start ordinal to use during Daylight Saving mode. Options are first/second/third/fourth/last.
(Month, Day, Default is second.
Time)
Daylight Saving time usually starts at the same time on the same day of the week in the same month
every year. Each day of the week occurs four or five times a month. Therefore, you are selecting the
week in which daylight saving time starts: the first, second, third, fourth or the last of the month.
Start Month Set the start month to use during Daylight Saving mode. The default is March.
Start Day Set the start weekday to use during Daylight Saving mode. The default is Sunday.
Start Time Set the start time to use during Daylight Saving mode. The default is 02:00 (hh:mm).
Daylight Saving End Time
End Ordinal Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving time
(Month, Day, ends. Options are first/second/third/fourth/last. The default is first.
Time)
End Month Set the end month to use during Daylight Saving mode. The default is November.
End Day Set the end weekday to use during Daylight Saving mode. The default is Sunday.
End Time Set the end time to use during Daylight Saving mode. The default is 02:00 (hh:mm).
Save Button
Click Save to save these settings.
33
Chapter 4 – Using the MultiModem iSMS Web Interface
MultiModem® iSMS System Administrator's Guide