Using The Wizard Setup To Configure The Multimodem Isms; Opening The Wizard Setup Window - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 3 – iSMS Basics and the Setup Wizard

Using the Wizard Setup to Configure the MultiModem iSMS

The Wizard Setup lets you conveniently enter the minimal setup requirements for a user based (web browser) Send SMS
environment. The information you enter here carries over to other windows that require similar information.
Note: For new units (units defaulted to factory settings), Received SMS is handled by the Receive API Polling feature. You
can use the Web Management interface to set up additional features and functions.

Opening the Wizard Setup Window

To open the Wizard Setup:
Log in.
1.
Click Wizard Setup located under the menu bar.
2.
In the LAN group, enter the desired LAN settings. Currently saved LAN settings are displayed.
3.
● IP Address – Enter the new IP address the MultiModem iSMS needs to use.
● Subnet Mask – Enter the subnet mask value to be used.
Default Gateway
●
● Primary DNS – Enter the IP address of your network's primary DNS server.
Secondary DNS – Enter a secondary DNS IP Address (if any).
●
● Save – Click Save.
MultiModem® iSMS Administrator's Guide
– Enter the IP address of your network's internet router or gateway.
28