Multitech MultiModem iSMS SF100-G Administrator's Manual page 102

Appendix A – Application Programming Interface (API)
TCP Receive API Request with Authentication
From: MultiModem iSMS/1.40
Authentication: OFF
Data-Length: 123
smsuser1
smsuser1
1:19525945092
+17635280856
08/10/15
07:29:32
26632HTTP Message text.
Above payload comprised of:
●
Username, Password if authentication is enabled and configured.
●
Receiving modem number details: If receiving modem's SIM number is configured then <ModemNumber> field has
modem index:SIM number. If receiving modem's SIM number is not configured then <ModemNumber> field has
modem index:
●
Sender's number
●
Date
●
Time
●
SMS Message
The MultiModem iSMS waits for an OK response from the TCP application. It times out in 30 seconds.
TCP Receive API – Non-Polling Mode
TCP Post Format
Successful Non-Polling TCP posts will be in the following format:
[Msg_Count ]
[Msg_index_1 ]
Modem Number
Sender Number
Date
Time
[Encode type ]
Message
[Msg_index_2 ]
Modem Number
Sender Number
Date
Time
MultiModem® iSMS System Administrator's Guide 102