Multitech MultiModem iSMS SF100-G Administrator's Manual page 59

Table of Trigger Codes and Trigger Actions
Trigger Objective
Code/Word
ADD To add an entry in the
address book
ADDG To add a group name
and an entry.
Note: The same action
trigger message is
used for creating a
group name and
adding an entry to a
group. So, in the
interface there is one
configuration for both.
ADDSMS To add a pre-
configured SMS
DEL To delete an entry
from the address book
DELG To delete a group
59
Chapter 4 – Using the MultiModem iSMS Web Interface
Configuring the Trigger Code and Its
Associated Trigger Action
Configuration format:
<act_tri_configured>;name;number
Example: ADD;joe smith;7635554174
Configuration format:
<act_tri_configured>;name
Example: ADD; joe smith
Configuration format:
<act_tri_configured>
Example: ADD
Configuration format:
<act_tri_configured>;grp_name
Example: ADDG;Building_201
Configuration format:
<act_tri_configured>;grp_name;name;
number
Example:
ADDG;Building_201;joe smith;7635554174
Configuration format:
<act_tri_configured>;grp_name;name;
Example: ADDG;Building_201;joe smith
Configuration format:
<act_tri_configured>;SMS
Example:
ADDSMS;Building 201 is closed until further
notice.
Configuration format:
<act_tri_configured>;name;number
Example: DEL;joe smith;7635554174
Configuration format:
<act_tri_configured>;name
Example: DEL;joe smith
Configuration format:
<act_tri_configured>;grp_name
Example: DELG;Building_201;joe smith
Action
Adds name with number
to address book.
Adds name with sender's
number to address book.
Adds name and number of
sender to address book.
Creates a group with a
group name.
Adds name with number
to a group. Group must
already exist.
Adds name to a group.
Group must already exist.
Adds SMS to
preconfigured list.
Deletes name with number
from the address book.
Deletes all entries with this
name from the address
book.
Deletes the group with the
group name.
MultiModem® iSMS System Administrator's Guide