Convenient Functions; Loading/Saving Your Favorite Settings And Piano Setups; Setting Page; Speaker Volume - Roland GP-9 Owner's Manual

°

Convenient Functions

Loading/Saving Your Favorite Settings and Piano
Setups
You can save your favorite settings or the piano's setup to a USB flash drive,
or load these settings that are saved to a USB flash drive into the piano.
* Settings can be loaded only into another piano of the same model.
Piano settings that are saved
Setting

Speaker volume

Headphone volume
Ambience Type
Ambience Depth
Key Touch
Brilliance
Master Tuning
Temperament
Temperament Key
Hammer Response
Piano Tone Edit
Volume Limit
* For the favorite settings that are saved, refer to the list of favorite
settings as shown in "Settings Saved Even If the Power Is Turned Off"
(p. 3).
Saving Your Favorite Settings and Piano Setups
(Registration Export/Piano Setup Export)
1
Connect your USB flash drive to the USB Memory port.
2
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3
Press the [–] [+] buttons to show either the "Registration
Export" or "Piano Setup Export" screen, and then press the
[ ] button to confirm.
The Registration or Piano Setup Export screen appears.
4
Edit the name of the registration or the piano setup.
Select the character which
Press the [–] [+] buttons
you want to change
Press the [
Change the character
buttons (edit character)Ópress the [
Insert one character
Press the [ò] button
Delete one character Press the [ó] button
5
Press the [–] [+] buttons to select µ on the right side of the
screen, and press the [ ] button to execute.
The settings are saved.
NOTE
Never turn off the power, disconnect the USB flash drive or unplug
the power cord while the screen indicates "Executing... " .
6
Press the [ ] button to exit function mode.
The [ ] button goes dark.
* Never turn off the power, disconnect the USB flash drive or
unplug the power cord while the indicator of GP-9 shows that an
operation is in progress.
Page
p. 8
p. 8
p. 9
p. 9
p. 11
p. 9
p. 18
p. 18
p. 18
p. 11
p. 19
p. 27
] button (confirm)Ópress the [–] [+]
] button (back)
Loading Your Favorite Settings and Piano Setups
(Registration Import/Piano Setup Import)
1
Connect your USB flash drive to the USB Memory port.
2
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3
Press the [–] [+] buttons to show either the "Registration
Import" or "Piano Setup Import" screen, and then press the
[ ] button to confirm.
The Registration or Piano Setup Import screen appears.
4
Press the [–] [+] buttons to select either Registration Import or
Piano Setup Import.
5
Press the [ ] button to confirm.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
6
Press the [–] [+] buttons to select "Yes", and press the [ ]
button to execute.
This loads the settings.
NOTE
Never turn off the power, disconnect the USB flash drive or unplug
the power cord while the screen indicates "Executing... " .
7
Press the [ ] button to exit function mode.
The [ ] button goes dark.
* Never turn off the power, disconnect the USB flash drive or
unplug the power cord while the indicator of GP-9 shows that an
operation is in progress.
* When you load favorite settings (registration) for which the
start-up settings have been changed, the unit switches to those
settings right after the power is turned on.
23