Table of Contents
Advertisement
Convenient Functions (Utility)
Backing Up Settings to a USB Flash Drive
(Backup)
Here's how to back up the settings to a USB flash drive.
On the Utility screen, use the [ ä ä ] [ å å ] buttons to select
1.
"Backup" and press the [Enter] button .
The Backup screen appears.
MEMO
To edit the backup filename, select "RENAME" and then press the [Enter]
button .
2.
To back up the song data as well, select the "Include
Song Data" check box .
Use the [ ä ä ] [ å å ] buttons to select "EXECUTE" and press
3.
the [Enter] button .
A confirmation message appears.
If you decide to cancel, select "Cancel" and press the [Enter] button.
Use the [ ç ç ] [ æ æ ] buttons to select "OK", and then press
4.
the [Enter] button .
Once the backup is finished, the message "Completed!" is shown and the
display returns to the Utility screen.
NOTE
This does not back up any installed Wave Expansion data or previously
imported Style Pack data.
MEMO
If "Include Song Data" is selected,
all songs that you've recorded are
backed up.
To keep your recorded songs, select the
check box.
Loading a Backup File into This Instrument
(Restore)
Here's how to load a backup file into this instrument.
NOTE
When you execute this operation, the settings that you saved (data
that was created) are overwritten.
If you've saved important data on this unit, assign it a different name
and back it up to a USB flash drive before restoring.
On the Utility screen, use the [ ä ä ] [ å å ] buttons to select
1.
"Restore" and press the [Enter] button .
The backup file appears in the Restore screen.
Use the [ ä ä ] [ å å ] buttons to select a backup file, and then
2.
press the [Enter] button .
3.
To restore the song data as well, select the "Apply Song
Data" check box .
Use the [ ä ä ] [ å å ] buttons to select "EXECUTE" and press
4.
the [Enter] button .
A confirmation message appears.
If you decide to cancel, select "Cancel" and press the [Enter] button.
Use the [ ç ç ] [ æ æ ] buttons to select "OK", and then press
5.
the [Enter] button .
The display indicates "Completed!", and then "Power Off, Then On".
6.
Turn the FP-E50's power off and on again .
70
70
Advertisement
Chapters
Table of Contents
