3. Press the Details button. The screen on the left is displayed.
4. Set the desired items (Paper Size, Paper Type, Paper Weight, Tray Adjust, etc.) as
desired. Use the more (
:
NOTE
Refer to
Refer to
Refer to
5. When you are finished, press return (
"Processing". When processing is complete press
Register your pattern using the instructions below.
Registering a Paper Pattern
1. To register a paper pattern make the following selections from the OCP:
Printer / Paper Source / Paper Pattern / Preset Register / Tray # / Pattern #
The display will appear like the samples below but will show the selected pattern
settings on the right side of the display. Use the more (
between the screens and verify all settings are correct.
2. Press enter (
Processing. When processing is complete press
Load the pattern using the instructions that follow.
3-32
Paper Handling
8
) button to toggle between the screens.
page 3-23
for Tray Adjust instructions.
page 3-28
for Color Control instructions.
page 6-54
for Detach Voltage instructions.
<
) from either screen to register the pattern.The display will indicate
3
<
), then enter (
). The OCP will indicate
to return to the main menu.
8
) button to toggle
to return to the main menu.