Displaying The Printer Configuration Screens Using The Control Panel; Configuring Printer Settings From The [Menu] Key; Configuring Printer Settings From The [User Tools] Key - Ricoh SP 4510DN User Manual

Hide thumbs Also See for SP 4510DN:

Table of Contents

1. Getting Started

Displaying the Printer Configuration Screens

Using the Control Panel

This function is available for SP 4510DN only. If you are using SP 4520DN, see page 30

The configuration screens allow you to change or set defaults.

• If Administrator Authentication Management is specified, contact your administrator.

Press the [Menu] key.

Select the settings you want to change.

Press the [ ] or [ ] key to select the next or previous items.

Press the [OK] key.

• Any changes you make with configuration screens remain in effect even if the main power switch is

• To cancel changes made to settings and return to the initial display, press the [Escape] key.

Configuring Printer Settings from the [User Tools] key

This function is available for SP 4520DN only. If you are using SP 4510DN, see page 30 "Configuring

Printer Settings from the [Menu] key".

This section explains the setting items available on the [User Tools] screen of the printer.

The configuration screens allow you to change or set the default settings.

Chapters

Table of Contents