User Tools (Copier Features); Accessing The User Tools (Copier Features) - Ricoh AFICIO 120 Operating Instructions Manual

StellaC1a-EN-CopyF_V4_FM.book Page 51 Wednesday, September 12, 2001 4:03 PM

4. User Tools (Copier Features)

Accessing the User Tools (Copier
Features)
This section is for the key operators in
charge of this machine. The user tools
allow you to change or set the ma-
chine's default settings.
Preparation
Always exit the user tools when
you have finished.
Reference
For details about how to access the
system settings, see "Accessing
The User Tools (System Settings)"
in the System Settings manual.
For information about the Fax user
tools, see the Facsimile Reference
manual.
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to display
"3. Copier Features", and then
press the { { { { OK} } } } key.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key until de-
sired User Tools menu is dis-
played, and then press the { { { { OK} } } }
key.
D D D D
Change the settings by following
the instructions on the panel dis-
play, and then press the { { { { OK} } } } key.
Reference
See p.54 "Settings You Can
Change with the User Tools".
Note
❒ { { { { OK} } } } key: Press to make the
new settings and return to the
previous menu. { { { { Cancel} } } } key:
Press to return to the previous
menu without changing any da-
ta.
❒ The settings are not canceled
even if the main power switch is
turned off or the { { { { Clear Modes} } } }
key is pressed.
51