When Copying Onto Ohp Transparencies - Ricoh AFICIO 120 Operating Instructions Manual

StellaC1a-EN-CopyF_V4_FM.book Page 28 Wednesday, September 12, 2001 4:03 PM
Copying
Reference
For details about how to set the
copy paper, see p.28 "When
copying onto OHP transparen-
cies", p.29 "When copying onto
standard size pap er ", p.29
"When copying onto custom
2
size copy paper" or p.30 "When
copying onto envelopes".
C C C C
Place your originals, and then
press the { { { { Start} } } } key.
Important
❒ Do not insert copy paper into
the bypass tray while copying
or copy interruption. A misfeed
might occur.
When copying onto OHP
transparencies
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to display
"3. Copier Features", and then
press the { { { { OK} } } } key.
28
C C C C
Press the 0 0 0 0 or 1 1 1 1 key to display
"6. Bypass Paper Type", and then
press the { { { { OK} } } } key.
D D D D
Press the 0 0 0 0 or 1 1 1 1 key to display
"Special/OHP", and then press
the { { { { OK} } } } key.
E E E E
Press the { { { { User Tools/Counter} } } } key
to exit from the user tools.
F F F F
Gently insert the OHP transpar-
ency face down and adjust the pa-
per guide.
Important
❒ The side of OHP transparency
that is copied is fixed. Before
you place the OHP transparen-
cy in the bypass tray, check the
cutting position of the OHP
transparency.