Placing A Single Original On The Exposure Glass; Loading Originals In The Document Feeder - Ricoh AFICIO 120 Operating Instructions Manual

StellaCEN-basic_V4_FM.book Page 14 Thursday, July 19, 2001 1:39 PM
Faxing
Placing a Single Original on
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder, such as a book,
on the exposure glass one page at a
time.
2
A A A A
Lift the Exposure Glass Cover.
Place the original face down and
align its upper left corner with the
reference mark at the upper left
corner of the exposure glass.
1.
Reference mark
2.
Scale
B B B B
Close the Exposure Glass Cover.
Note
❒ When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, press down on the origi-
nal to prevent its bound part
from rising.
14
Loading Originals in the
Document Feeder
Use the Document Feeder to scan in a
stack of originals in one operation.
The Document Feeder can handle sin-
gle-sided originals.
Limitation
❒ The maximum document length is
1260mm (49.6") with manual assis-
tance.
❒ Place all the originals to be sent in
a single stack.
❒ You cannot set originals in the
Document Feeder one page at a
time or in sheaves.
❒ Do not open the Document Feeder
while it is scanning the originals or
your document could be jammed.
Note
❒ If an original jams, press the
{ { { { Clear/Stop} } } } key, and then remove
the original carefully.
❒ If your original is bent or folded,
flatten it before you set it.
❒ Set thin originals on the exposure
glass.
Reference
For information about the sizes
and number of originals that can
be placed in the Document Feeder,
see Chapter 8 "Originals" in the
Advanced Features manual.