Troubleshooting; Error & Status Messages On The Control Panel - Ricoh AFICIO 120 Operating Instructions Manual

Error & Status Messages on the Control
Panel
Messages/Second messages
Add Toner
Open Front Cover and
/Follow Instructions to
Replace it
Clear Misfeed(s)
/Follow instructions in
Front Cover
Close Front/Right Cover
Load Bypass Tray
[Paper Size]
Load Paper
[Paper Size]
Load Tray #
[Paper Size]
Memory Overflow
Job Incomplete
Memory Full
Job Incomplete
Printing...
Print Overrun
Job Incomplete

3. Troubleshooting

Description
Toner is running out.
There is misfeed at the front
cover.
The front or right cover is open. Close the front or right cover.
There is no paper left in the
Bypass Tray.
The paper size setting on the
tray differs from that of print-
er driver.
There is no paper left in this
tray.
A memory overflow has oc-
curred.
A memory full has occurred.
The printer is printing.
A print overrun occurred on a
file being printed. Only a part
of the data on the page will be
printed, and the print job is
suspended, or the current
print job has been canceled.
Solution
It is time to supply toner.
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
Load paper into the Bypass
Tray.
Load paper that matches the
paper size settings. Printing
will not automatically resume
if the paper size and orienta-
tion settings are incorrect.
Load paper into the tray indi-
cated.
Add memory to the printer.
Add memory to the printer.
Wait for a while.
To print the image correctly,
add memory to the printer or
simplify the actual data size.
Set "Page Protect" to "On" on
the printer driver. Be sure to
return "Page Protect" to "Au-
to" after the print job. With
"Page Protect" "On", the print-
er performance might be de-
creased. While using the
PostScript printer driver, low-
er the resolution setting.
19