Troubleshooting; Machine Operation Problems; General; Display - Ricoh AFICIO 120 Operating Instructions Manual

StellaC-EN-CopyF_V4_FM.book Page 39 Wednesday, July 4, 2001 11:23 AM

Machine Operation Problems

General

Machine's Condition
The machine instructs you to
wait.
You cannot enter the desired
copy set number.
The machine instructs you to
enter the user code (8–digit
number).

Display

Problem
The panel display is off.
Nothing happens when the
operation switch is turned on.

3. Troubleshooting

Problem/Cause
The machine is warming up.
The number of copies exceeds
the maximum copy quantity.
User codes are set.
Cause
The machine is in Energy Sav-
er mode.
The operation switch is
turned off.
The main power switch is
turned off.
The power cord is unplugged. Make sure that the power cord
The main power switch is
turned off.
The power cord is unplugged. Make sure that the power cord
Action
Wait for the machine to warm-
up.
Reference
You can use Auto Start
mode during the warm-up
period. See p.31 "Auto
Start".
You can change the maximum
copy quantity that you can
make at a time. See "1. Max.
Copy Q'ty" in p.56 "Copier
Features".
Enter the user codes. See p.31
"User Codes".
Action
Turn on the operation switch.
See p.1 "Guide to Compo-
nents"
Turn on the main power
switch. See p.1 "Guide to
Components"
is plugged into the wall outlet
firmly.
Turn on the main power
switch. See p.1 "Guide to
Components".
is plugged into the wall outlet
firmly.
39