Ricoh AFICIO 120 Operating Instructions Manual page 214

Stella-EN-SysF_V4_FM.book Page 18 Wednesday, July 4, 2001 1:29 PM
User Tools (System Settings)
Menu
9. Pap.Tray Priority (for
Copy mode only)
2
10Auto Tray Switch (for
Copy mode only)
11Display Contrast
12Measurement Unit
18
Description
When the optional paper tray unit is equipped with your machine,
you can select a default paper tray in the following conditions:
• When the operation switch is turned on.
• When the { { { { Clear Modes} } } } key is pressed.
• When the Copy Reset Timer comes into effect.
1: Tray 1
2: Tray 2 (optional paper tray unit)
Note
❒ Default: Tray 1
If you load paper of the same size and direction in two trays, the
machine automatically switches to another tray when the tray in
use runs out of paper. You can set or cancel this setting. The op-
tional paper tray unit is required to use this setting.
Note
❒ Default: On
You can adjust the brightness of the panel display.
You can select the unit of measurement.
Note
❒ Default: inch