Other Functions; User Codes - Ricoh AFICIO 120 Operating Instructions Manual

StellaC1a-EN-CopyF_V4_FM.book Page 31 Wednesday, September 12, 2001 4:03 PM

Other Functions

User Codes

When user codes are set, operators
must enter their user codes before the
machine can be operated. The ma-
chine keeps count of the number of
copies made under each user code.
Note
❒ When user codes are set, the ma-
chine will prompt you for your
user code after the power switch is
turned on or Copy Reset Timer
comes into effect.
❒ To prevent others from making
copies using your user code, press
the { { { { Clear Modes} } } } and { { { { Clear/Stop} } } }
keys simultaneously after copying.
Reference
For details about user codes, see
p.54 "Settings You Can Change
with the User Tools".
Setting the User Code
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to display
"3. Copier Features", and then
press the { { { { OK} } } } key.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key until "7. Key
Op. Tools" is displayed, and then
press the { { { { OK} } } } key.
D D D D
Press the 0 0 0 0 or 1 1 1 1 key until "7.
Program User Code" is displayed,
and then press the { { { { OK} } } } key.
E E E E
Enter the desired user code with
the number keys, and then press
the { { { { OK} } } } key.
Other Functions
2
31